wheel spacer recommendations
#4
wheel spacer recommendations
<div class="FTQUOTE"><begin quote>Originally posted by: YTM_225_DX_LOVER
Go with billet aluminum... WAY stronger! and is it jsut me or is it starting to seem like we're the only two ppl on this forum who are interested in SX's?</end quote></div>
Sure seems that way! It's really frustrating when you can't get any replies to a post!
Did you get that SX yet?
I picked up a couple of wheels with tires last night for $50 from a kid who posted a craigslist ad. He's parting out an '86 Honda Fourtrax 200SX. I got the 8" steel rear wheels with Cheng Shin C828's on them (the tire you were telling me about). The tires have very little wear, although one of them has a small plug in it, but it's not leaking. The wheels are kinda rough and one of them won't hold air because the valve stem is leaking. Can you replace a valve stem without removing the tire from the wheel? And one thing that's really strange is that one tire is a little bit taller than the other, I'd say about a half inch. Have you ever seen anything like that? I'd post pics of them if I knew how.
Go with billet aluminum... WAY stronger! and is it jsut me or is it starting to seem like we're the only two ppl on this forum who are interested in SX's?</end quote></div>
Sure seems that way! It's really frustrating when you can't get any replies to a post!
Did you get that SX yet?
I picked up a couple of wheels with tires last night for $50 from a kid who posted a craigslist ad. He's parting out an '86 Honda Fourtrax 200SX. I got the 8" steel rear wheels with Cheng Shin C828's on them (the tire you were telling me about). The tires have very little wear, although one of them has a small plug in it, but it's not leaking. The wheels are kinda rough and one of them won't hold air because the valve stem is leaking. Can you replace a valve stem without removing the tire from the wheel? And one thing that's really strange is that one tire is a little bit taller than the other, I'd say about a half inch. Have you ever seen anything like that? I'd post pics of them if I knew how.
#5
wheel spacer recommendations
As far as I know, you have to pop at least on bead off the rim to change a stem, because you dont want the cutoff nub bouncing around inside your tire. And yes I have seen the "these two tires aren't the same size" syndrome... mine were like that because one of them was low on air and the other one was overinflated. No I don't have the SX yet... I gotta sell my dirt bike first... Stupid little Yamaha TT-R 90 lol... probably get the trike this spring and i seriously cant wait!
#7
Trending Topics
#8
wheel spacer recommendations
Ya we put the C828's on my Tri-Moto... but we used a jack-all under the bumper of the truck to break the beads on the old tires and then prybars to peel them off... the prybars to put one bead of the new tires on and ether and a match to finish putting them on
#9
wheel spacer recommendations
<div class="FTQUOTE"><begin quote>Originally posted by: YTM_225_DX_LOVER
Go with billet aluminum... WAY stronger! and is it jsut me or is it starting to seem like we're the only two ppl on this forum who are interested in SX's?</end quote></div>
im tryin to find a sx around my area for a decent price ... think their cool as hell... have a few to many projects goin on at the moment lol
Go with billet aluminum... WAY stronger! and is it jsut me or is it starting to seem like we're the only two ppl on this forum who are interested in SX's?</end quote></div>
im tryin to find a sx around my area for a decent price ... think their cool as hell... have a few to many projects goin on at the moment lol
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)