I am attempting to put my hardware from my 1984 200s onto a 200x frame with rear suspension. The problem is I am unsure if it will work. I also do not know what parts I need for the rear suspension swing arm and such. If anyone has any input I would really appreciate it.

 

Also on ebay I found the 200x frame the swing arm and suspension piston. What else do I need

 

i havent done one but it has been done ... ive heard it called a "auto X" do a search for it on 3 WHeeLeR WoRLD-Kickin' It into High Gear im pretty shure the motor is a direct swap in

 

I have a '86 200S, '84 auto 200X and a '85 200X. Few parts interchange other than the engine. Unless the 200x is almost complete it could get expensive. Ebay is the best place for parts if you are knowledgeable. The 83-85 200X frame is different than the 86-87 and parts won't interchange. If making the auto x you will need the older style round tube frame. You will have to use the 200x stator unless you change the wiring harness over from the 200s. The engine should bolt right in. Get a manual if you don't have one. There is a link on one of my other posts someone sent me for one online.