This machine handles better than any trike I have ever sat on, it has 4" axle extensions and 8" aluminum racing wheels with low profile tires, the front tire is a narrow tracter type tire on a smaller aluminum racing wheel.
Unfortunatly it has to be rebuilt, the moron who rebuilt it before I got it didn't get the C clips in the piston all the way and the wrist pin slit out and put a nice deep scar in the cylinder wall.
It will have to be sleeved and brought back down to a smaller size since it has been bored twice.
If anyone know any good mods for this machine it would be greatly appreciated.

Thanx

Bulldogg

<< 3 is as good as anything else if you know what your doing >>

 

some good mods for a 200X is a pipe,ITP HOLESHOT tires (awesome in all areas..mud snow hard pack ect)Wiesco piston. Thats about all I can think of. But you are right 200X's are awesome machines!!!

 

Thanks Motoxer

I just rebuilt my 200x the 2nd of this month I got a good deal on a new cylinder and piston($100) for both and it is 40 over. I have a aftermarket pipe on there but I'm not sure what it is, I know it's not stock.
I have some pretty good tires on the back there not holeshots but they will do for now.

thanks.

bulldogg

 

try a bigger cam that make a lot on mine i could lean over the handle bars and pull a wheelie on gravel.



1985 200x
Wisco piston
bored 50 over
34 Mukuni Carb
Racin cam
Honda forever