they have some pretty cheap CDI boxes on ebay that claim to add power and increase the rev limit 1000 RMP... would this be worth getting or is that something that I would be better off getting from a big name company.. I just cant see spending 290 bucks on a CDI..

 

I saw the same one,it looks like a deal but you don't know what you are getting[img]i/expressions/face-icon-small-frown.gif[/img]

 

They look like the new ones from Big Gun. They my be rejects or stolen

 

Its not stolen. But like the EBAY description says, it was a prototype and the curve was too advanced for production. The production units are selling for around $230 at various places on the web. Its not a bad deal if you want to race with it - probably not good for idle or trail riding... IHMO [img]i/expressions/face-icon-small-wink.gif[/img]

 

hey, there's a cheap one on the classifieds page under the motor section, its a woods for a $100, i think thats pretty cheap

kc

 

you should be a good son and by that for your dad[img]i/expressions/face-icon-small-smile.gif[/img] i know you have some money saved.

 

his b-day was last month, and i was going to, but my mom would not let me barow $20, so i got him a set of front wheels, from Daren420

kc

 

This is where the CDI's are coming from: Procom Engineering

Click on the link, then select the products tab at the top, the CDI's are all listed.

I e-mailed the guy and he was an A$$... below is the e-mail

----- Original Message -----
From: <gaskett@cfl.rr.com>
To: <wesley@procomengineering.com>
Sent: Friday, September 26, 2003 3:36 PM
Subject: Question for seller -- Item #2434595706


> Who's it made by?
>

-----Original Message-----
From: PROCOM ENGINEERING-WESLEY [mailto:wesley@procomengineering.com]
Sent: Friday, September 26, 2003 7:17 PM
To: gaskett@cfl.rr.com
Subject: Re: Question for seller -- Item #2434595706


By our self! We are preffesional on this.
>

----- Original Message -----
From: <gaskett@cfl.rr.com>
To: <wesley@procomengineering.com>
Sent: Friday, September 26, 2003 3:36 PM
Subject: Question for seller -- Item #2434595706

Preffesional??

By our self meaning who?... I'm not about to spend a dime on something that I can't find out information on.

What is the RPM limit set to?
What is the timing curve set to?

Next time, try not being so blasé' in your answer.


>
----- Original Message -----
From: "Glenn Breem" <gaskett@cfl.rr.com>
To: "'PROCOM ENGINEERING-WESLEY'" <wesley@procomengineering.com>
Sent: Friday, September 26, 2003 4:23 PM
Subject: RE: Question for seller -- Item #2434595706


Preffesional??-Re-designed by Procom, Made by ANZ engineering.

By our self meaning who?... I'm not about to spend a dime on something that I can't find out information on.

What is the RPM limit set to? -8,500RPM, stock one only 7,500rpm. What is the timing curve set to? -Unknow

Next time, try not being so blasé' in your answer.
-----------------------------------------------------------------------------------------


This is when I looked at the e-mail address he was using and looked up their company. Then I decided against the CDI.

Glenn

 

there will probably be several used woods and pami's out soon.