DS-650 Where can I get "A" Arm replacement bushings?
#1
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I've got a 2003 DS-650 Baja and the front "A" Arm bushings are loose. Who has bronze or better than stock aftrer market replacements?
Thanks
GLWBEAR
2003 DS-650 Baja
glwbear@netmagic.net
Thanks
GLWBEAR
2003 DS-650 Baja
glwbear@netmagic.net
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Thanks Justin, but mine seem to be tight. The Bushings appear to be loose on the upper "A" Arms and I sure as hell don't want to put back in the stock plastic bushings. There are "After Market" bronze & plastic bushings available for Yamahas and that is what I'm looking for!
Thanks for the reply and Merry Christmas to you & your's!
GLWBEAR!
Thanks for the reply and Merry Christmas to you & your's!
GLWBEAR!
#5
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I don't know of any companies that make any replacement bushings, but they are of a very simple design so any competent machine shop could turn out a set in a day. My first set felt loose at about 50 hours, so now I grease the whole machine every ride, and they are still good with over 300 hours on the machine.
Justin
Justin
Thread
Thread Starter
Forum
Replies
Last Post
trouttracker
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
07-20-2015 11:54 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)