'04 axle on an '03 DS Is it worth a try?
#1
#5
#6
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
If they are wider evenly you are right. I don't see why they would be off-set.
So 1" wider. Man, it is tight through the trails here. That extra 1" ,believe it or not, will be felt.
I punctured the sidewall on the Ohitsu's and picked up a set of used Dunlops from a Z400. It's like riding on ice compared to the originals I had. I can only imagine the grip from the Razr 2's.
I am so tired from riding all night last night and working all day today. I must sleep now.
Thanks for setting me straight on the width. I can live with 1"
So 1" wider. Man, it is tight through the trails here. That extra 1" ,believe it or not, will be felt.
I punctured the sidewall on the Ohitsu's and picked up a set of used Dunlops from a Z400. It's like riding on ice compared to the originals I had. I can only imagine the grip from the Razr 2's.
I am so tired from riding all night last night and working all day today. I must sleep now.
Thanks for setting me straight on the width. I can live with 1"
#7
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
If you get the Razr 2s they will be much thicker and very likely more puncture resistant, so you may end up having less of a problem. (I know my ITP Holeshot XCTs which are very much like your Razr 2s are VERY thick!) Also when your reading these tires sizes: remember that 99% of all 'advertised' tires sizes are NOT correct. The only way to know the REAL size is to get out a tape measure. One companies 10" might be the same size as another companies 12" wide tire.
Trending Topics
#8
#10
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
JMAC,
that will certainly narrow the back end of the DS - about six inches! ...But you wouldn't hit anything, and you would probably be about as wide in the rear as a stock Raptor. I didn't care for the tippy feeling of the stock Raptor I rode, I could only imagine how it would feel on a DS that narrow. I think you someone was to narrow the quad that much it would be wise to lower it a couple of inches as well, even if loosing some suspension travel.
that will certainly narrow the back end of the DS - about six inches! ...But you wouldn't hit anything, and you would probably be about as wide in the rear as a stock Raptor. I didn't care for the tippy feeling of the stock Raptor I rode, I could only imagine how it would feel on a DS that narrow. I think you someone was to narrow the quad that much it would be wise to lower it a couple of inches as well, even if loosing some suspension travel.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)