What type of LOCTITE ?
#1
What type of LOCTITE ?
Since I got my motor back, I have had my flywheel off and my clutch basket [img]i/expressions/face-icon-small-disgusted.gif[/img] All I had was blue loctite. Before I run this motor anymore, what is the correct loclite to use so I can rip this thing apart again and use the correct stuff..Unless I will be OK with Blue.
#3
#5
#6
What type of LOCTITE ?
Originally posted by: BigBadScrambler
It can even be used to fill hair line cracks. You have to heat that stuff up though to get it off.
It can even be used to fill hair line cracks. You have to heat that stuff up though to get it off.
#7
What type of LOCTITE ?
Originally posted by: rescuediver
BBS, thanks for that extra tidbit. Also, who's that in your author icon[img]i/expressions/face-icon-small-wink.gif[/img] Bet you don't use a ribbed?
BBS, thanks for that extra tidbit. Also, who's that in your author icon[img]i/expressions/face-icon-small-wink.gif[/img] Bet you don't use a ribbed?
Trending Topics
#9
What type of LOCTITE ?
I dont know the exact # of the type of loctite, But I think there is a certain type that is a different density, Kinda like BigBadscrambler was describing... ThePunisher or someone should know exacly what kind of stuff to SAFELY use for Flywheel bolt and other side...
[img]i/expressions/face-icon-small-mad.gif[/img] Unfortunately someone put your starter gear on backwards!!!!!![img]i/expressions/face-icon-small-shocked.gif[/img]
[img]i/expressions/face-icon-small-mad.gif[/img] Unfortunately someone put your starter gear on backwards!!!!!![img]i/expressions/face-icon-small-shocked.gif[/img]
#10
What type of LOCTITE ?
111200 purple loctite= removable screw grade 1/4" and smaller.
121200 blue loctite= removable nut grade medium strength 1/4" and larger. both of these are removable with hand tools.
131600 red loctite= permanent studgrade heat to remove. there are more reds that are heat resistant and a big pain in the ars. I use blue on a daily basis at my job. but have never used it in a engine due to heat and vibration. I use it on heavy suspension. and it works great.I am not saying it will not work. I have not seen it fail. but,I probably would have used red 131600.
121200 blue loctite= removable nut grade medium strength 1/4" and larger. both of these are removable with hand tools.
131600 red loctite= permanent studgrade heat to remove. there are more reds that are heat resistant and a big pain in the ars. I use blue on a daily basis at my job. but have never used it in a engine due to heat and vibration. I use it on heavy suspension. and it works great.I am not saying it will not work. I have not seen it fail. but,I probably would have used red 131600.