Parts list to get me going again.
#1
#2
#3
Parts list to get me going again.
I have the stock steel bumper, some of the paint in front chipped a little from roost but the black powdercoat underneeth still good, no bare metal showing, no dets or bends or dings.
I have a black tank cover - ran with it for a year so its got some dullness and scratching from coats rubbing and stuff, and the top of each side has a rub mark where aftermarket bars rubbed prior to getting riser kit. I removed it change colors to red.
And I have stock handlebars with stock grips and crossbar pad.
Its all yours, free. Just pay the shipping.
PM if you want it, if the condition described is okay with you.
I only hung on to it all for when somebody like you might need it down the road!
I have a black tank cover - ran with it for a year so its got some dullness and scratching from coats rubbing and stuff, and the top of each side has a rub mark where aftermarket bars rubbed prior to getting riser kit. I removed it change colors to red.
And I have stock handlebars with stock grips and crossbar pad.
Its all yours, free. Just pay the shipping.
PM if you want it, if the condition described is okay with you.
I only hung on to it all for when somebody like you might need it down the road!
#4
Parts list to get me going again.
That is seriously generous!
My hat is off to Hightower!
I don't have anything I can help with from that list though. Have you checked eBay for the shock? Someone has got to have a stock shock somewhere for cheap....
How bad is the frame / chassis? Can you possibly have it bent back into shape? I've heard if it is not too bad bending it back isn't too bad of a deal, never as good as the original, but far cheaper than a new frame.
I just noticed that Country Joe Glass has the top and bottom right side A-Arms collecting dust in his garage, you should email him about those.
If your steering stem is bent, 222 is looking for one.
My hat is off to Hightower!
I don't have anything I can help with from that list though. Have you checked eBay for the shock? Someone has got to have a stock shock somewhere for cheap....
How bad is the frame / chassis? Can you possibly have it bent back into shape? I've heard if it is not too bad bending it back isn't too bad of a deal, never as good as the original, but far cheaper than a new frame.
I just noticed that Country Joe Glass has the top and bottom right side A-Arms collecting dust in his garage, you should email him about those.
If your steering stem is bent, 222 is looking for one.
#5
Parts list to get me going again.
try www.quadpro.ca they got everything used for the ds. also try moto-quadsport.com. both are canadian used parts..
#7
Parts list to get me going again.
THANK YOU VERY MUCH HIGHTOWER!!! check your PMs, [img]i/expressions/face-icon-small-happy.gif[/img]
the frame would need alot of small bends to bring i back, plus the frame rail slightly twisted, so now the is a lot o stress points, for that much work needed i don't think its worth the time, plus asl i like to jump i wouldn't want the frame to buckle
the frame would need alot of small bends to bring i back, plus the frame rail slightly twisted, so now the is a lot o stress points, for that much work needed i don't think its worth the time, plus asl i like to jump i wouldn't want the frame to buckle
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)