Back from the Dyno-report/spray
#21
Ohhh that's just great just F'n great that is the last thing that us poor folk need is for you to be another 10 bikes ahead of us on the hill. I will have to agree with you on the Preacher's motor building ability cus' all of us that have seen you ride, you ride hard and put dang near any fuel through that thing you can get your hand's on. But really, those are some very impresive numbers and I'll be gald to be another 10 behind you. I'll be at the sand sports show next weekend. so no Dumont for me but maybe the next trip you make out I'll meet up with you out there. Chris you should go to.
Tom
Tom
#22
If the temperatures drop enough like Mario is suggesting it does sound like a good way to spend a weekend. Any guess on wind at Dumont this time of year? I don't want to have my tent filled with sand if I drag it out there.
I just ordered some 60% clutch springs and I'm going to install them in a few minutes, we'll see if that has any effect on performance. I've heard they have a much better 'feel' when they engage.
Right now the 10-day shows between 100 and 105 the entire forecast.
The average for the suggested weekend according to weather.com is 95 - 96 degrees, pretty damn toasty out on the hot sand.
http://www.weather.com/weather/monthly/USCA0061
I just ordered some 60% clutch springs and I'm going to install them in a few minutes, we'll see if that has any effect on performance. I've heard they have a much better 'feel' when they engage.
Right now the 10-day shows between 100 and 105 the entire forecast.
The average for the suggested weekend according to weather.com is 95 - 96 degrees, pretty damn toasty out on the hot sand.
http://www.weather.com/weather/monthly/USCA0061
#23
Originally posted by: ANNIHILATERNOS PULL = 92.1 hp....74.2 ft lb torq. Bottle pressure was @ 1100psi.
#27
Sincity duner, I will probably go to Dumont this sat. Afternoon to do some more sand tuning.
What do you ride?
Can you make it Sat?
Powerhouse atv is new and it is off spring Mt and Valley veiw in chinatown. 2nd right when heading south on valley veiw.
Before I dynoed the owner told me to not be discuraged if the #s were low, I told him I was used to low #s. After the dyno session I must have asked him 5 times if his dyno was on point. The hp # seemed high to me on nos, but I feel every bit of the n2o when hitting the button.
What do you ride?
Can you make it Sat?
Powerhouse atv is new and it is off spring Mt and Valley veiw in chinatown. 2nd right when heading south on valley veiw.
Before I dynoed the owner told me to not be discuraged if the #s were low, I told him I was used to low #s. After the dyno session I must have asked him 5 times if his dyno was on point. The hp # seemed high to me on nos, but I feel every bit of the n2o when hitting the button.
#28
I never made an all motor run, but I pulled 58.66 hp and 48.7 lb/ft torque on spray. Not close to your numbers, but decent for an all stock motor. Congratulations on your numbers! N20 is the way to go!
#29
Originally posted by: 14mins
Those are killer numbers. Sweet. Glad you are 1500 miles away
Those are killer numbers. Sweet. Glad you are 1500 miles away
#30
Sandbomber, you planning on making the trip to Texas next year with your bikes?? I will talk to Meaner about not giving you another shower if you show up.[img]i/expressions/face-icon-small-smile.gif[/img]


