I ported my Intake ... (pics)
#11
I ported my Intake ... (pics)
Originally posted by: DSengineer
From the looks of it My Mr. HP ported intake has a lot more material taken off. It has a much thinner ring of metal at the carb side of the intake. He also did not touch the side of the intake that touches the motor.
From the looks of it My Mr. HP ported intake has a lot more material taken off. It has a much thinner ring of metal at the carb side of the intake. He also did not touch the side of the intake that touches the motor.
#12
I ported my Intake ... (pics)
Ok Ricky, Graffix Unlimited (407-291-7000) is the place. Ocoee, Fl. (vic@graffixunlimited.com). He said to email him with the size and colors. Mine are 3inch x 16inch. The DS letters are white w/black underlay and the "650" is just plain black. But you can get what ever colors you want. He is a real cool guy too.
#13
I ported my Intake ... (pics)
Well, as for the opening on the intake, the goal should be to "straighten" the flow path as much as possable. So if you open the entrance along with the rest of the runner, you will still have about the same radius on the "S" shape side of the runners. Only they'll be further apart. The line of sight looks better to me this way. The "S" shape has been flattened as far as i feel safe to take it. The machined edge for the boot gets in the way. Once i start my flow testing, i'll know for sure. I gotta round up another motor first. Anyone?
Once i start getting the flow data, i'll let you guys in the 411. I was looking at the stock head on my bike, and the short turn is pretty abrupt. Drops way too sharp. I can't wait to get my hands in there. [img]i/expressions/face-icon-small-wink.gif[/img]
Once i start getting the flow data, i'll let you guys in the 411. I was looking at the stock head on my bike, and the short turn is pretty abrupt. Drops way too sharp. I can't wait to get my hands in there. [img]i/expressions/face-icon-small-wink.gif[/img]
#16
I ported my Intake ... (pics)
Well, the 05's are all red now. No paint needed. I assume you're asking about my rear fender decals. I had those special made. I used to have a 86' 350X, and they looked alot like that. I always liked the way they looked. So, i made some for the DS. [img]i/expressions/face-icon-small-wink.gif[/img]
#18
#19
I ported my Intake ... (pics)
Originally posted by: AllRedBomber
Well, the 05's are all red now. No paint needed. I assume you're asking about my rear fender decals. I had those special made. I used to have a 86' 350X, and they looked alot like that. I always liked the way they looked. So, i made some for the DS. [img]i/expressions/face-icon-small-wink.gif[/img]
Well, the 05's are all red now. No paint needed. I assume you're asking about my rear fender decals. I had those special made. I used to have a 86' 350X, and they looked alot like that. I always liked the way they looked. So, i made some for the DS. [img]i/expressions/face-icon-small-wink.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
09-25-2015 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)