MRHP..how did your bike beat the...
#21
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Yea running the sand was actually a great opportunity to test our known setup and decide if the dirt track really was that heavy on top end. Plus I had to make a decision about putting a fuel pump on my bike and had plenty of room a Sicily Island to run it out and see if the float bowls were going dry.
We have just never had our bikes lay down that hard on topend. That track was DEEP from 200ft to the finish line.
1Big the 840 will make 5-7hp more than the 800, it's all about horsepower per cubic inch.
We have just never had our bikes lay down that hard on topend. That track was DEEP from 200ft to the finish line.
1Big the 840 will make 5-7hp more than the 800, it's all about horsepower per cubic inch.
#22
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Now is the time for the 730 or 800 for mrhp, he has done great with the stock bore now its time to really move some air.
Sandbomber's bike is going to be his dune bike not an all out drag bike. That makes those numbers posted at gilbert even more impressive. Hp can make up for a difference in rider and chassis prep up to a point, after that math takes over.
Later
Justin
Sandbomber's bike is going to be his dune bike not an all out drag bike. That makes those numbers posted at gilbert even more impressive. Hp can make up for a difference in rider and chassis prep up to a point, after that math takes over.
Later
Justin
#23
#25
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
OK all I want is my 840 to put out around 95hp and a 30 hp shot of go juice[img]i/expressions/face-icon-small-happy.gif[/img] Get all of it to the ground with a lock up and override. With stock frame set up properly it should run 3.99s all day long + sum[img]i/expressions/face-icon-small-shocked.gif[/img] Life will be real good!!!!! Its comming soon
#26
#28
#30
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Hey Sandbomber, that lockup is going to be sweet! But, what did you think about that new clutch kit and springs holding up to 14 paddles, 3rd gear launches, and 120hp?! I hadn't even thought about it- that was another thing I was concerned about going down there- first test for the clutch kit on the highest hp ds I've been on- then just to make sure, 3rd gear launches [img]i/expressions/face-icon-small-smile.gif[/img]
222
222