Stock bore stage 2 VS hpr 730 dyno
Dec 16, 2005 | 04:24 PM
#51
Range Rover
Keeps busy in the garage building one thing or another.
Keeps busy in the garage building one thing or another.
Joined: Dec 2003
Posts: 195
Likes: 0
Stock bore stage 2 VS hpr 730 dyno
Originally posted by: choosetolose04
So, Is it safe to say that a all out race everything 730 kit should produce close to 80hp when properly tuned?
So, Is it safe to say that a all out race everything 730 kit should produce close to 80hp when properly tuned?
Dec 16, 2005 | 04:37 PM
#52
Pro Rider
THEBOM Racing. If it don't scare you a little, it's not going fast enough !!!
THEBOM Racing. If it don't scare you a little, it's not going fast enough !!!
Joined: Jan 2001
Posts: 1,251
Likes: 0
Stock bore stage 2 VS hpr 730 dyno
95% of the drag motors I have running can be trail rode. No heating or lazyness on bottom.
10 degrees on the cams is right at 1 tooth. If your custom cutting cams,Why?? As far as the A1A2 cams go, I though they were off the self junk??? Not DRAG cams.
The pipe difference may have played a 3-5hp gain over the RW mod pipe. But the 730cc should have easyly made the difference over 650 with its custom cams.
BigDaddy, don't believe everything you read on different web sites!!!!
10 degrees on the cams is right at 1 tooth. If your custom cutting cams,Why?? As far as the A1A2 cams go, I though they were off the self junk??? Not DRAG cams.
The pipe difference may have played a 3-5hp gain over the RW mod pipe. But the 730cc should have easyly made the difference over 650 with its custom cams.
BigDaddy, don't believe everything you read on different web sites!!!!
Dec 16, 2005 | 04:39 PM
#53
Range Rover
Keeps busy in the garage building one thing or another.
Keeps busy in the garage building one thing or another.
Joined: Dec 2003
Posts: 195
Likes: 0
Stock bore stage 2 VS hpr 730 dyno
I think its more important as to how long you can stay at 80hp or whatever hp on whoevers dyno. Less shifts would seem better than peaky hp numbers
Dec 16, 2005 | 04:42 PM
#54
Thread Starter
|
Extreme Pro Rider
No Mercy Racing! Got NOS?
No Mercy Racing! Got NOS?
Joined: Mar 2003
Posts: 3,004
Likes: 0
Stock bore stage 2 VS hpr 730 dyno
Geat point Jeff. I didnt know the a1a2 were drag cams. My motor is no where near drag. Its not even set up for regular GAS... Its set up for alky dynoed with GAS carb. Its only 180 psi for compression.
And I could trail this motor ALL day long, It runs cooler than mikes due to how rich I run the bottom end. I made 5 passes on the dyno and it didnt even get past 160 degrees. lol
And I could trail this motor ALL day long, It runs cooler than mikes due to how rich I run the bottom end. I made 5 passes on the dyno and it didnt even get past 160 degrees. lol
Dec 16, 2005 | 04:44 PM
#55
Extreme Pro Rider
Joined: Dec 2001
Posts: 3,858
Likes: 0
Stock bore stage 2 VS hpr 730 dyno
Let's see....stock bore drag motor with drag pipe and drag cams VS big bore trail motor with small cams and in frame pipe. Basiclly making the same power. Now the way I see it Bigdaddy has drag bike power with a dune/trail motor. Sounds like the best of both worlds to me.
I had a drag motor all this time and didn't know it!![img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img] Mario.... I should have charged you TRIPLE!!! LMAO.
Bigger.
Dec 16, 2005 | 04:53 PM
#56
Pro Rider
THEBOM Racing. If it don't scare you a little, it's not going fast enough !!!
THEBOM Racing. If it don't scare you a little, it's not going fast enough !!!
Joined: Jan 2001
Posts: 1,251
Likes: 0
Stock bore stage 2 VS hpr 730 dyno
Originally posted by: biggerisbetter
I had a drag motor all this time and didn't know it!![img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img] Mario.... I should have charged you TRIPLE!!! LMAO.
Bigger.
Let's see....stock bore drag motor with drag pipe and drag cams VS big bore trail motor with small cams and in frame pipe. Basiclly making the same power. Now the way I see it Bigdaddy has drag bike power with a dune/trail motor. Sounds like the best of both worlds to me.
I had a drag motor all this time and didn't know it!![img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img] Mario.... I should have charged you TRIPLE!!! LMAO.
Bigger.
Dec 16, 2005 | 04:58 PM
#57
Extreme Pro Rider
Joined: Apr 2004
Posts: 4,078
Likes: 0
Stock bore stage 2 VS hpr 730 dyno
Originally posted by: biggerisbetter
I had a drag motor all this time and didn't know it!![img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img] Mario.... I should have charged you TRIPLE!!! LMAO.
Bigger.
Let's see....stock bore drag motor with drag pipe and drag cams VS big bore trail motor with small cams and in frame pipe. Basiclly making the same power. Now the way I see it Bigdaddy has drag bike power with a dune/trail motor. Sounds like the best of both worlds to me.
I had a drag motor all this time and didn't know it!![img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-confused.gif[/img] Mario.... I should have charged you TRIPLE!!! LMAO.
Bigger.
WOW! Im kinda feeling like a big league player since my "drag bolt-on motor" pulled 58hp on the dyno, [img]i/expressions/face-icon-small-shocked.gif[/img]
Dec 16, 2005 | 05:00 PM
#58
Pro Rider
Joined: Feb 2004
Posts: 2,247
Likes: 0
Stock bore stage 2 VS hpr 730 dyno
Originally posted by: BigDaddy331
This thread is going bad real quick.....
Before we start going into some sort of mob linching,
This thread is going bad real quick.....
Before we start going into some sort of mob linching,
Dec 16, 2005 | 05:12 PM
#59
Thread Starter
|
Extreme Pro Rider
No Mercy Racing! Got NOS?
No Mercy Racing! Got NOS?
Joined: Mar 2003
Posts: 3,004
Likes: 0
Stock bore stage 2 VS hpr 730 dyno
OK, OK, OK I will admit the secret of this so called drag motor I bought from Bigger for $1200... Well, Kyle told me that there was some special cow chit that was on the valve cover that was magical. lmfao
This little stock bore revs pretty fast for being on gas. BUT My old 730 made 10 more ft lb torq than this motor ON THE DIESLE DYNO with my modded RW pipe. FYI
This little stock bore revs pretty fast for being on gas. BUT My old 730 made 10 more ft lb torq than this motor ON THE DIESLE DYNO with my modded RW pipe. FYI
Dec 16, 2005 | 05:16 PM
#60
Extreme Pro Rider
Joined: Mar 2002
Posts: 4,405
Likes: 0
Stock bore stage 2 VS hpr 730 dyno
Originally posted by: ANNIHILATER
OK, OK, OK I will admit the secret of this so called drag motor I bought from Bigger for $1200... Well, Kyle told me that there was some special cow chit that was on the valve cover that was magical. lmfao
This little stock bore revs pretty fast for being on gas. BUT My old 730 made 10 more ft lb torq than this motor ON THE DIESLE DYNO with my modded RW pipe. FYI
OK, OK, OK I will admit the secret of this so called drag motor I bought from Bigger for $1200... Well, Kyle told me that there was some special cow chit that was on the valve cover that was magical. lmfao
This little stock bore revs pretty fast for being on gas. BUT My old 730 made 10 more ft lb torq than this motor ON THE DIESLE DYNO with my modded RW pipe. FYI