CAN-AM (BRP) Discussions about CAN-AM ATVs.

Where can I find...?

Thread Tools
 
Search this Thread
 
  #1  
Old 05-21-2006, 06:29 PM
jwmm04's Avatar
Trailblazer
Thread Starter
Join Date: Mar 2006
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Default Where can I find...?

I need some factory DS parts, what is the best site to get them from? I need part # 711250920 (gasket), part # 711634317 (starting gear), and part # 711958857 (spring). Where is the cheapest place to get these from? Also, can I get used parts from anywhere other than flea-bay? Thanks! -JW
Also, I have a White Brothers R4 slip-on, on my bike already, If I were to go to the FMF slip-on would I need to re-jet? Thanks again! Oh, by the way, my bike is an '02 DS650.
 
  #2  
Old 05-21-2006, 09:24 PM
DS650powe's Avatar
Pro Rider
Runs a 730 kit from OMW with web109's and a 48mm lectron. It has some serious torque!
Join Date: Jan 2006
Posts: 683
Likes: 0
Received 0 Likes on 0 Posts
Default Where can I find...?

why do you want to change to a fmf?
 
  #3  
Old 05-21-2006, 10:17 PM
jwmm04's Avatar
Trailblazer
Thread Starter
Join Date: Mar 2006
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Default Where can I find...?

Cause my White Brothers is all dented up, and scratched up. I want something new.
 
  #4  
Old 05-21-2006, 10:30 PM
DS650powe's Avatar
Pro Rider
Runs a 730 kit from OMW with web109's and a 48mm lectron. It has some serious torque!
Join Date: Jan 2006
Posts: 683
Likes: 0
Received 0 Likes on 0 Posts
Default Where can I find...?

if i had to get a new pipe, i'd go to ondunes.com and order a Top Gun slip on, only 250 dollars and its suppose to be the best slip on for the DS
 
  #5  
Old 05-21-2006, 11:47 PM
jwmm04's Avatar
Trailblazer
Thread Starter
Join Date: Mar 2006
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Default Where can I find...?

Well, you have the FMF, how do you like it?
 
  #6  
Old 05-22-2006, 12:57 AM
DuneRider650's Avatar
Pro Rider
I ride a little here and there......
Join Date: Jul 2004
Posts: 1,821
Likes: 0
Received 0 Likes on 0 Posts
Default Where can I find...?

Ide go with the Yoshimura, HMF, Topgun, or Ron Woods...they all are very good. The hmf and yoshi are bottom and mid pipes while the woods and topgun get out on the top a bit...but i think the topgun pretty much performs good everywhere.
 
  #7  
Old 05-22-2006, 07:56 AM
jwmm04's Avatar
Trailblazer
Thread Starter
Join Date: Mar 2006
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Default Where can I find...?

Originally posted by: DuneRider650
i think the topgun pretty much performs good everywhere.
Link? I can't seem to find it. Would I need a rejet going from my old WB slip-on, to a new silencer?
 
  #8  
Old 05-22-2006, 04:41 PM
DuneRider650's Avatar
Pro Rider
I ride a little here and there......
Join Date: Jul 2004
Posts: 1,821
Likes: 0
Received 0 Likes on 0 Posts
Default Where can I find...?

Hpresearch
 
  #9  
Old 05-22-2006, 06:10 PM
DS650powe's Avatar
Pro Rider
Runs a 730 kit from OMW with web109's and a 48mm lectron. It has some serious torque!
Join Date: Jan 2006
Posts: 683
Likes: 0
Received 0 Likes on 0 Posts
Default Where can I find...?

i really like my FMF, it packs a good low and mid range whallop, but if i had to do it over again i would go with the Top Gun, it just seems like a better all around pipe and i like the idea of the end cap so i can quiet it.
 
  #10  
Old 05-22-2006, 08:02 PM
jwmm04's Avatar
Trailblazer
Thread Starter
Join Date: Mar 2006
Posts: 53
Likes: 0
Received 0 Likes on 0 Posts
Default Where can I find...?

Originally posted by: jwmm04
I need some factory DS parts, what is the best site to get them from? I need part # 711250920 (gasket), part # 711634317 (starting gear), and part # 711958857 (spring). Where is the cheapest place to get these from? Also, can I get used parts from anywhere other than flea-bay?
I think I am going to go with the topgun. Now, to that question, where can I get these parts? Oh, and would I need a rejet when changing slip-ons from my WB pipe, to either the yosh, or topgun? Thanks! -JW
 


Quick Reply: Where can I find...?



All times are GMT -5. The time now is 04:12 AM.