I have been on and around a great rappy all day, Bigdaddy660 did a great job on his but hard to match the ole short bus for bullet proof!!!!!!

Better have yo chit together when ya line up with BigD cuz its running hard, cant wait to see it under the lights.

 

BRP has been expirementing with the DS.

I heard about a perimeter aluminum framed DS with a 720cc engine that was built for testing. Don't know if BRP will go that route, but they are looking at making changes.

Also heard about putting the 800cc engine idn a DS frame, but it would be a CVT and most DS fans like having gears, so I doubt that will happen.

I think BRP is going the right direction with the 800cc CVT package with the Renegade. They will probably release a 2X4 version of a Renegade eventually, which would be about 65#s lighter than the 4X4 version.

 

I have heard these rumors aswell, not doubting your integrity Tim. But till Can-am releases this info to the public its just hair say to me!! I have a good rep from Can-am saying the same, could be same source!lol but no hardcore facts!! Please share with the diehards if you will so, your info if backed by facts! Semper Fi carlton

 

DSnut If this is true Your a good man.........

I'll say this much THIS NEXT YEAR will be interesting with ALL the changes from BRP and Yamaha..........

Just to make sure, I LIKE BOTH THE DS AND THE RAPTOR. I think BOTH machines are great in there on way.......[img]i/expressions/face-icon-small-smile.gif[/img]

Thanks again Bomber for the technical advice and seat of the pants advice..........Rappy Did GOOD today [img]i/expressions/face-icon-small-wink.gif[/img]

 

I have had great luck so far with the 804 raptor. I know we dont have the same hp as glens bike but we hope to get there and hold together. I have a big valve head almost finished so we will see how the hp goes after that.


Glen, do you mind telling us how much hp you pull on all motor. My 804 on gas with stock valves put down 77 hp and carried over 70 hp from 5400 to 8400 rpm, it also peaked right at 70 ftlbs torque

 

So I take it you made it out to the sand box today [img]i/expressions/face-icon-small-cool.gif[/img]

 

It was a great time in the sand box!!!!! The rappy will be laying down moppins for sure!!!

MY 855 is in the low 90s right now on motor, more testing with cams in the hillbilly haven soon to hopefully get it into the upper 90s so I can really smile [img]i/expressions/face-icon-small-happy.gif[/img]

 

Glen, do you remember any 300 ft times on all motor. Im shure we have a long way before we can run with you, your hp #s are GREAT.

 

4fitty, 4.2 on motor (gas) with 222 as pilot with a ssr rigid!!!

 

Was that a rigid or suspended frame Glen?