Outlander 4x4 not working
#1
Outlander 4x4 not working
Looking for insight on Outlander's 4 wheel drive not coming on. I have an 03 Outty 400 with about 1500 miles. Tried to pull the kids on sleds other day and found out my 4x4 was not kicking on, no 4x4 light, no sound when the 4x4 switch is flipped. All 4 fuses look good. No idea where to start my trouble-shooting.
Has anyone experienced this problem?
Has anyone experienced this problem?
#4
#6
Outlander 4x4 not working
The 4x4 switch looks fine. I took it apart and no evidence of water or corrosion.
Next I wil check the wiring and make sure there is no corrosion/broken wires, and verify that I am getting power to the actuator.
I hope it is not the acutator, looks pretty pricey.
Next I wil check the wiring and make sure there is no corrosion/broken wires, and verify that I am getting power to the actuator.
I hope it is not the acutator, looks pretty pricey.
#7
Outlander 4x4 not working
<div class="FTQUOTE"><begin quote>Originally posted by: hworcester
I hope it is not the acutator, looks pretty pricey.</end quote></div>
Not to mention a pain to replace. I have replaced a few actuators on the Outlander 400's. You have to remove the front shaft, and then remove the housing the actuator attaches to. There is a piece inside that usually breaks, it is shaped like a fork that slides a shaft back and forth to engage the front wheels.
I hope it is not the acutator, looks pretty pricey.</end quote></div>
Not to mention a pain to replace. I have replaced a few actuators on the Outlander 400's. You have to remove the front shaft, and then remove the housing the actuator attaches to. There is a piece inside that usually breaks, it is shaped like a fork that slides a shaft back and forth to engage the front wheels.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)