just re-jetted my 04 bajax...i pulled the airbox and put k&n on...also running rwr full race exsaust
im at 800 ft in oregon
i changed the jetting from a 185 main with clip on 2nd notch due to the airbox and bigger pipe (was running alba and airbox)

the instructions said to install a 195 main..with clip on third notch and turn the air mix screw out 2 1/4 turns...the brass screw was siezed and i couldnt get it to budge....also ended up stripping it...
it was currently stuck at 2 turns for the 185 jet

i put it all back together and test ran it around the block...everything seems to be allright?...whatcha think?...is 2 turns close enough???

 

That will be fine. That 1/4 turn should be ok