OK fixed the woods stage 1 kit carb problem with the hesitation. NOW can we ds riders get a solution to the hard twisting throttle the kit comes with, the carb spring is too strong for reasons beyond me, lets after-mod it to work, help me you guys. springs and different positions?

 

This problem seems to be coming from Mikuni instead of coming from Ron Woods. I currently carry Mikuni TM series carbs[as apposed to HRS series from Woods] to sell for Team Pami and have the same issue with the twist throttle version.I was going to try removing the pin that holds the left side cam onto the throttle shaft so I could unwind the spring one or two turns. This should lessen the tension on the throttle. Then press then pin back in place to re-install the cam.

By the way jimmie, the carb worked much better for me without the acc. pump.

 

Knutz
Can you gie me so information on the Mikuni TM Carb? Where can I purchase one?

 

From outside looks, the TM seems to be the same as the HRS. Team Pami uses the TM and I have it in stock with the twist throttle. Mikuni may be able to give you more details about the difference between the two. If you would like to order one, please e-mail me and I'll get it off to you. Thanks

 

hey knutz i thought the same thing but didn't want to chance f'n up the spring, let me know if you try it. and the pump fixed my response problem off idle, maybe your 760 didn't need it.

 

Hey jimmie you still got your stock carb? Wanna get rid of it? Give me a good deal on it. remember who hooked you up with a good deal on a ds650 jacket ;o)

 

sure mtecate4g make me an offer.

 

knutz i'm gonna try a spring off a ski-doo snomobile carb, it might just do the trick.