CAN-AM (BRP) Discussions about CAN-AM ATVs.

stock carb problems in ds

Thread Tools
 
Search this Thread
 
  #1  
Old 05-19-2001, 04:56 PM
dsbomb's Avatar
Trailblazer
Thread Starter
Join Date: Apr 2000
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
Default

hey everyone, my ds spits back through the carb when you touch the throttle lightly. it has done it since new. its about a year old. you sit idling and push the throttle a little bit and hold it and it will spit back .sometimes it will kill the motor when you start to take off. any help appreciated
 
  #2  
Old 05-19-2001, 10:03 PM
ScoobyDFW's Avatar
Extreme Pro Rider
Join Date: Jan 2000
Posts: 2,880
Likes: 0
Received 0 Likes on 0 Posts
Default

Have you tried adjusting the pilot fuel screw under the carb?
 
  #3  
Old 05-21-2001, 09:56 AM
dskurt's Avatar
Range Rover
Join Date: Nov 2000
Posts: 157
Likes: 0
Received 0 Likes on 0 Posts
Default

Mine does that when its warm. My pilot screw is at 2 and a half turns. Which way would you suggest going with it?
 
  #4  
Old 05-21-2001, 07:08 PM
dsbomb's Avatar
Trailblazer
Thread Starter
Join Date: Apr 2000
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
Default

ive turned the screw in and out at different adjustments and it doesnt help the spitting. i have a dynojet needle and jet in it but i dont think it would make any difference
 
  #5  
Old 05-23-2001, 04:59 PM
Joseph's Avatar
Weekend Warrior
Join Date: Apr 2001
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default

I just went thru that issue with mine. I even took mine to an authorized dealer who jetted the bike and adjusted the carb but did not fix the problem.

The problem is a loose wire on the ignition coil.

The ignition coil is mounted uder the tank and the wire can been seen from the left side slightly above the rev limiter. It is a black wire and the bike will start once off but tends to act up when lightly pressing the throttle.

I discovered this while installing an RPM gauge on the bike. The coils needs to be tapped in on the installation at which time I discovered the loose wire.

If you cant find the wire contact RON WOODS and ask them to fax you a copy of the installation sheet for the RPM Gauge and you will find it.

Good Luck,

Joseph Oceguera

E-mail Joemiami07@aol.com

00 DS 650
Custom X Muffler
Rotax Box
K& N Filter
Carb. Jetting
Alba Racing Kit
Nurf Bars
RPM Undercarrige Protection
6 Pack Rack
Ron woods RPM Gauge
 
  #6  
Old 05-23-2001, 08:28 PM
JSsDS's Avatar
Pro Rider
Join Date: Mar 2001
Posts: 1,084
Likes: 0
Received 0 Likes on 0 Posts
Default

Excelent info Joseph, this is the kind of feed-back that makes this forum so good.

DSBOMB; If that doesn't fix it though, check the valve clearence if you havn't already done so.
 
  #7  
Old 05-23-2001, 11:30 PM
dsbomb's Avatar
Trailblazer
Thread Starter
Join Date: Apr 2000
Posts: 98
Likes: 0
Received 0 Likes on 0 Posts
Default

THANKS FOR THE INFO GUYS, I'LL TRY THAT COIL WIRE WHEN I GET A CHANCE. THEN MAYBE THE CLEARANCE. I'LL LET YOU KNOW WHATS UP
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hankey Pankey
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
26
10-18-2020 03:50 PM
Ty Speece
Chinese Quads
15
07-02-2015 04:59 PM
generalpops
Polaris
5
06-05-2015 08:23 PM
generalpops
Introduce Yourself
1
06-03-2015 08:25 PM
kevbowe
General Chat
0
06-01-2015 01:17 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: stock carb problems in ds



All times are GMT -5. The time now is 01:13 AM.