Glamis last weekend
#1
Billds650... It was nice to meet you last weekend. Thanks for letting us see all the cool accessories you've installed (gas tank, carb, pipe ect). Did you get it dialed in?
The weather was excelent. A little windy on Friday but Saturday and Sunday were great. Slightly breezy and about 85-90 deg. I installed the RWR end cap and 24 disks, seem to gain a bunch of low end and didn't loose much on top. Alot quieter! Thanks Hitower for the info on the disks.
Later
The weather was excelent. A little windy on Friday but Saturday and Sunday were great. Slightly breezy and about 85-90 deg. I installed the RWR end cap and 24 disks, seem to gain a bunch of low end and didn't loose much on top. Alot quieter! Thanks Hitower for the info on the disks.
Later
#2
hinglbyds it was a good day need to make a weekend next time. I have the shocks dialed in still need to work on the gearing can make up olds in 4th but it is not pulling hard at the top. Here is the photo of you guys. DS650's at OLDS
#3
Weather was great, wind really sucked Friday night like you said Steve...
I need to take the bolts out of my American Star A-Arms and drill their heads for safety wire. I think I'm going to run them without the stock A-Arm ball joint protectors too....saw some pics online for American Star A-arms going on a 400ex, they weren't using them.
I need to take the bolts out of my American Star A-Arms and drill their heads for safety wire. I think I'm going to run them without the stock A-Arm ball joint protectors too....saw some pics online for American Star A-arms going on a 400ex, they weren't using them.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
02-01-2022 11:48 AM
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)