Sam Coe input?
#4
Sam Coe input?
well to start with he had some communication problems with what he wanted done,not to big a deal but added more down time.then he got his crank back and it was too wide,twisted,and had too much runout.so he sent it back and asked them to narrow the crank up a certain spec,instead the made it narrower than what he asked for, not really a big deal except he had to order a new crank endplay shim=more down time.in the mean time he had the crank re-cked after samcoe told him it was within a half a thousands.it was not.it was still twisted .002 and had .004 runout.so he had a local shop staighten it out.on a side note the rod they use appears to be identical to my stock raptor rod i replaced with a carrilo.the stock rappy rod has been know to fail on built non stroked raptor motors.so with the extra piston speed of a +5mm ds who knows if itll hold up.samecoe doesnt do their own crank work,i guess they farm it out.the work they did themselves looks pretty good.it is kinda funny though he was told when he orderd it it was 102mm bore and plus 5mm stoke.720cc.he got a 103mm bore,+5mm stoke,didnt really complain but seems sad their salesman doesnt know what hes selling.
#7