whats in your garage?
#1531
whats in your garage?
Need to clean the garage of cars and truck parts. 86 Mustang 5.0HO auto tranny, complete car, not running, no title, was going to take engine and drivetrain and put in older mustang, will part out if needed. Also 93 merc cougar XR7 3.8L automatic, with 87,000 miles, runs and drives great, 20 mpg plus, small dent in pass. front fender, other than that car is loaded and in perfect cond with remote start and keyless entry. Also 91 Olds bravada 4x4 auto trans do not believe to be good, 90's s10 blazer/truck transfer case beleived to be good, 91 S10 blazer 4.3L was running just used oil. Also have many parts for early 80s F250s 4x4s. Have 2 complete trucks with great 351M engines and manual trans, and one has brand new transfer case with no miles, no body parts good on either trucks. Also have straight 6 engine, parts, and trans. Let me know if anyone has room for this stuff. I would like to see my empty space filled with 4x4 quad, 2 stroke sport, 4x4 Jeep Wrangler, CJ etc, or small 4x4 truck. Or more DS parts needed: ported intake, stock endcap, TAG or Trailtech bars, and lightweight drivetrain parts.
#1532
whats in your garage?
I have a brand new 04 Z400 frame in my garage. It is brand new straight from the Suzuki factory. 100% legitimate. Never been titled or registered. I bought it from a local dealer with the intent of building a custom quad from the ground up, but ended up buying a whole quad instead. This frame has never had a part mounted on it and is still in the shipping material from Suzuki. I have the original receipt from a local shop and bill of sale. This frame can be titled in any state, but does not come with a title since it has never been titled or registered in any state. Frames come from the factory without title unless you buy the whole quad. this frame is just taking up space. PM me with questions or if you're interested in getting this out of my way.
#1533
whats in your garage?
I have the following DS650 parts taking up to much room in my garage:
Old used HMF slip on exhaust
Used lectron 44mm power jet carb - "Gone" - This left my garage to a forum members garage. Thanks!
Extra HPR billet end cap.
I might have another 44mm power jet Lectron carb that needs to leave soon.
Old used HMF slip on exhaust
Used lectron 44mm power jet carb - "Gone" - This left my garage to a forum members garage. Thanks!
Extra HPR billet end cap.
I might have another 44mm power jet Lectron carb that needs to leave soon.
#1534
#1535
whats in your garage?
I have a set (2) Douglas .160 9" aluminum rear wheels & 1 set of stock steel 9" rear wheels off an 04' DS 650 that is taking up space in my garage. Im needing a couple sets of aluminum wheels with yamaha bolt-pattern in my garage [img]i/expressions/face-icon-small-smile.gif[/img]
#1536
whats in your garage?
I have a new unused AC Racing rear grab bar.
I also have two used rear grab bars that have the six pack rack for carrying a cooler. They are in good condition. One is an Armadillo, and the other is a different brand (can't think of the name of it right now).
Desert Viper
I also have two used rear grab bars that have the six pack rack for carrying a cooler. They are in good condition. One is an Armadillo, and the other is a different brand (can't think of the name of it right now).
Desert Viper
#1537
whats in your garage?
I've got an hpr drag pipe laying around that has been used ONCE. I went to one drag race with it installed and thats it. It is black and cost $530 when i bought it. Offers.....
I also have a set of .125 honda bolt pattern aluminum wheels w/prowedge II drag tires from hpr that were also only used ONCE. I'm not kidding when I say once and only for 5 runs up the track. I'm looking to get out of atving...not in a real hurry or anything.
I also have a set of .125 honda bolt pattern aluminum wheels w/prowedge II drag tires from hpr that were also only used ONCE. I'm not kidding when I say once and only for 5 runs up the track. I'm looking to get out of atving...not in a real hurry or anything.