I got a piston that needs to get out of my garage asap. Woods 12.5:1

 

IVE GOT
STOCK PISTON
11.5:1 PISTON
2 FRONT YELLOW FENDERS
STOCK CDI
LECTRON WITH CABLE AND THUMB THROTTLE
ALBA EXHAUST EITHER OPEN END CAP AND DISCS
AC NERF BARS
STOCK FOOT PEGS

 

i am still in need of a left side tie rod dont need the ends mines a little bent i hope someone has one so i dont have to spend 90 bucks at my dealer oh yeh its a 2002 baja and left side when your sitting on it thanks guys

 

I have a banshee with anything and everything a banshee guy could want. chrome this and polished that.
custom plastic, swingarm everything must go pm if interested in anything i got it all

 

Items taking up room in my garage.
Good set of '00 DS650 upper stock A-arms.
Stock '01 DS650 swing arm.
Front wheel fenders yellow with brackets.
Stock '00 DS650 CDI box.
Brand new set of 20X11x10 Shedders mounted on new 10x10 .125 rims for DS650 rears.
Used set of stock '00 DS650 rear tires & rims. 20X10X9 Dominators.
Stock yellow rear fender



Items needed for garage
Ds650 tach good or bad
head light
black rear fender
K&N air filter

Please email me at 1-sandman@msn.com

 

I need a tm 45 for my shelf . And some ft ds rims .

 

Still got a piston that needs to go asap. I'm motivated...........

 

This is a built 720 sleeved w/ no leak issues. 105.5 piston, 450 cams, larger valves, ported. 14:1 comp. All new intermediate gears. light flywheel etc,

ThIS MOTOR NEEDS NEW CRANK, It snapped flush with the case. Maybe re-hone sleeve and check everything out on it just to be safe, but other than the crank ($400) everything ran exellent before. NOTE- to avoid confusion I was reffering to the crank cost of $400 for a new one, that is NOT the price of the motor.

k-mart special type price.

Note- this is NOT my current motor, its from my other 720-730.

 

HOW MUCH FOR THAT PIPE. EMAIL ME AT JSAINTEN@ANZIO.NAVY.MIL THATS A NAVY EMAIL ACCOUNT SO THATS WHY IT LOOKS WEIRD. ANYWAY LET ME KNOW. THANKS.

 

i still have a stk carb, valves, i also have a bunch of shims for valves not unders, overs.