Taotao 125 brake not working so will not start.

Subscribe
Oct 15, 2017 | 09:49 AM
  #1  
I bought my daughter a taotao 125 and it's been running fine. Last weekend I went to start it up for her and worked fine. I slide the back around and it stalled. I went to put the brake back on and the rear light did not come on. I also noticed that when the brake is applied the neutral light goes out. So it will not start now. Checked bulb and wiring connections and all appear good. And ideas?? I know she wants to ride.
Reply 1
Oct 16, 2017 | 02:51 AM
  #2  
Check for a bad earth, when lights start going out because you turn something else on, it is usually an earth fault. Also check main positive wire from battery to ignition switch.
Reply 0
Jan 4, 2020 | 04:22 PM
  #3  
I have one that's doing something similar when I apply brake to start the neutral light goes out and wont start
Reply 0
Jan 5, 2020 | 03:22 AM
  #4  
I forgot to mention the most obvious, a flat battery, otherwise it is almost certain to be the above mentioned bad connections on main wires.
Reply 0