Can anyone identity this ATV. Picked it up cheap as a learning adventure. Want to price out new plastics. It's a beauty. lol

Thanks.

 

Based on my gas tank, I narrowed it down to these. Is there anything that identifies the manufacturer / model on the ATV? Are the plastics interchangeable between models?Known to fit Taotao ATA110B3 , Eagle 110 BI (FA-C 110 BI), ATA110D1/D, ATA110H, 125 Sport Utility (125 HW), ATA110B/B1, 70 FA, 90 FA , 110 BY, 110 FA, ATA125A/A1, ATA125D, ATA125G, ATA125H, ATA135D, ATA135DU, TForce, Mudhawk 6, NEW TFORCE, NEW CHEETAH, Cheetah and Raptor.

Known to fit Coolster 3050B, 3050B-2, 3050C, 3050D, 3125B, 3125R, 3125X8, 3125XR8, 3125XR8-S and 3125C.

 

There should be a VIN plate somewhere on the frame, usually just behind the front bull bar, but can be anywhere. Also the number on engine will tell bore of engine, capacity may be marked on cylinder too. After that you Google photos of each model it could be, until you find which it is. steel fuel tanks are unusual on modern ATVs 95% have plastic tanks, so that narrows it more, as does that moulded bracket for the rear reflector and lack of real, or fake, headlamp. Plastics are often shared by different makers, but that also means the maker will use different plastics on the same basic frame, depending if they want it to look like a Yam Raptor, or a utility bike.