When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I ordered a new cdi box and a connector for it the old on isn't making good connection it's falling apart. It's a 150cc gy6 engine. The old connector have 6 wires on it. A switched ground and a ground... The new connector only have 1 ground in the switched ground spot. Can I use just that or do I need to figure out how to add that other ground wire.
So the advert says 6 Pin CDI and it only has 5 wires. I could be wrong, but I would connect both earth wires on loom to the single one on the new wiring plug. A bit odd that an earth would be "switched" anyway, but check that wire doesn't go anywhere else, as it will now be permanently earthed by the other wire.
So the advert says 6 Pin CDI and it only has 5 wires. I could be wrong, but I would connect both earth wires on loom to the single one on the new wiring plug. A bit odd that an earth would be "switched" anyway, but check that wire doesn't go anywhere else, as it will now be permanently earthed by the other wire.
09-07-2022 | 07:18 PM
Wiring help
