I parted out two complete Eton 90cc 2-stroke Viper ATVs, a 70cc 4-stroke Viper, and a 50cc RXL. Let me know what you need (brakes, hubs, spindles, a-arms, swingarm, handlebars, frame, axle, carburetor, exhaust, wheels/tires, engine).

I did compression tests on the engines. One 90cc tested 90 psi and the other 90cc tested 60 psi. The 90 psi engine should run ok (the compression ratio is only 5.8:1 on these engines) but will need a top end refresh soon. The 60 psi engine needs a top end rebuild now. I'll take $120 for the 90 psi engine and $60 for the 60 psi engine. Both come with the electric starter. The 70cc tested at 80 psi so it either needs new rings or the valves are too tight. It has the electric starter. I'll take $120 for the 70cc engine. The internal condition of the 50cc engine is unknown and the electric starter is gone. I'll take $50 for the 50cc engine. Shipping engines of this size is $30-$40 via FedEx based on LT80 engines I've shipped in the past.

 

Hello, new to the site. I'm looking for the plastic and wheels for a 2000 dxl 90. Please let me know. Thanks

 

Do you have plastics for the viper?

 

Still have any ETON parts ?