94 Yamaha Big Bear 350 4x4 clutch problem?
#1
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
you need to adjust the slack in your clutch cable
you clutch is not fully dis-engaging when you pull the clutch lever
check the inline fuel filter to your carb, sounds like it is close to being plugged up
also pull the cylinder head cover , you may need to adjust your intake / exhaust valve clearance
drain your engine oil and replace with oil meant for wet clutches
i personally recommend SHELL ROTELLA T6 synthetic diesel engine oil
i used the conventional rotella in my old ninja 600 bike , makes a hell of a difference in engine smoothness and smooth clutch shifting
not to mention a cooler running engine
you clutch is not fully dis-engaging when you pull the clutch lever
check the inline fuel filter to your carb, sounds like it is close to being plugged up
also pull the cylinder head cover , you may need to adjust your intake / exhaust valve clearance
drain your engine oil and replace with oil meant for wet clutches
i personally recommend SHELL ROTELLA T6 synthetic diesel engine oil
i used the conventional rotella in my old ninja 600 bike , makes a hell of a difference in engine smoothness and smooth clutch shifting
not to mention a cooler running engine
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)