ATV Winch issue
#42
#45
#46
this is what I currently have
#50
You will need to cut the 2 prong connector off the new switch harness and splice the 2 wires together , the black lead will go to 12+ [ same as blue wire on old switch ] , the other 2 wires will go to the small green & black wires on the solenoid .
If the in/out is backwards reverse the small wires going to the green & black wires on the solenoid .
If the in/out is backwards reverse the small wires going to the green & black wires on the solenoid .