I just purchased the 2014 Linhai Bighorn 400 and was looking through the owners manual as far as maintenance. The maintenance schedule is set by hours and I don't have hours indicated, as it is lists miles used instead on the panel. Anyone else had this issue on other SxS's?

 

Duh, found the button on the display panel. Such a newbie.

 

too bad they "hide" the features you're looking for.....live and learn. glad you found it.

 

I am really pleased with this SxS, put it to the test last weekend. Wish it was not so loud though. Thinking I will keep ear protection in the glove box and wear these when riding. Don't know if there is an after market muffler I could have installed to soften the noise. I also installed a windshield on it. The dealer told me I might consider taking it off when towing on the interstate, but it was such a pain to put on, I don't think I will. Seems to be on there pretty good, so I don't see how it could come off,

 

there should be quieter mufflers on the market as far as decibel ratings. linhai is a yamaha clone so yamaha mufflers should interchange quite easily.

 

any ideas on adjusting the suspension? I rode a friends Rhino today and the ride was so much more comfortable. I wonder if this is something I can improve on the Linhai by either changing out the shocks or if adjusting? Any ideas?

 

try adjusting before changing out shock. now, your tires are at the correct pressure, right? they don't need to have 50 psig in them, only like 4-8 psig.

 

I will check the tire pressure. I found out how to adjust the suspension and see the factory settings are in the middle, so will try to adjust it by one notch and see of this make a difference. This is on the rear. Did not see this type of adjustment possible on the front.

This is a video I found to do this:

 

Linhai 400 Bighorn 2D 2014model starts to sputter after about 6miles. Bought a new Carburetor and gave it a good service and still the same problem. I checked the following:
Spark
CDI
Regulator(charge 14 volt)
Coil
New battery
Fuses

Any help will be appreciated.
​​​​​


​​​​