What all mods do you have for your 400EX? So far, I have only minor modifications.

These include: Renthal handlebars w/Renthal grips, DG nerf bars, DG bumper, K&N filter w/Outerwears filter cover, Shockwears, Dynojet kit, and an FMF Powercore IV-2 silencer.

I hope in a few weeks to get an FMF Powerbomb header.

 

i only have a few
1.bored to a 426ex
2.11:1 piston
3.port job
4.rev box
5.k/n
6.dyno jet kit
7.6 air box vents
8.web cam
9.ids-2 super trapp pipe
10.14 tooth front sprocket
11.ac front bumper
12.full chasie skid plate
13.shock covers
14.stering stabilizar
15.front fenders cut
16.maxxis all track rears (22-11-9)
17.= lots of kick *** power

 

1. White Bros E-Series (slip on)
3. PRM Skids (chassis, swingarm, and a-arms)
2. Shock Covers
4. 165 Main
5. 42 Pliot
6. Modded Airbox
7. Uni Filter
8. Renthal Bars

Soon to have Razors all around on Douglas .190's and gearing mods.

 

tcs front
works ultracross rear
maier race front
dg nerfs
dg bumper
teather switch
+2+1 a-arms
+1 1/4 swingarm
+2+2 axle
white brother e-series pipe
shedder rear on douglas .190
k&n air filter and outer wear
40.5 mm keilen carb
motion pro twist trothal
rethal bars
ceet graphics kit and seat cover

 

Here ya go

 

Renthal bars
DG front bumper
DG Nerfs
Shock covers
White Brothers E-series exhaust
Rev kit
155 main Jet
K&N Air filter w/ filterskin
Emgo brush guards
Holeshot XCT's all the way around
on Douglas .190 wheels
Rear fastrekkers 20-10-9 on Douglas .190 wheels on backorder
Nacs headlight covers
1 new oil filter
Honda 4 stroke oil
Lots of cool stickers

Rdogg
#46 MHSC
'99 400EX
GO CARDINALS!!!!!!!!!!!!!!!!!!!!!

 

i ride a 2000 honda 400EX with maier purple plastic, purple renthal bars, black seat cover,motion pro twist throttle, prm full body skid plate, prm swing arm skid plate, prm front bumper, 22 inch blackwaters on rear, and in the mail are graydon proline aluminum nerf bars and 20 inch turf tamers. go to www.angelfire.com/stars/stuff4

 

Here's what I have:

Works triple rate front shocks
Denton shock covers
K&n filter
jet kit
Modified stock exhaust
Razrs all round
offset douglas .190 rear rims,
16 tooth front sprocket
renthal crossbar & pad on stock bars
trimmed fenders
tapered bearing carrier
lengthened clutch arm on motor (recommended)


Steve

 

Here's what I have:

Works triple rate front shocks
Denton shock covers
K&n filter
jet kit
Modified stock exhaust
Razrs all round
offset douglas .190 rear rims,
16 tooth front sprocket
renthal crossbar & pad on stock bars
trimmed fenders
tapered bearing carrier
lengthened clutch arm on motor (recommended)
ONE seat cover

Steve

 

I care more about power than speed so I dropped one tooth on my counter shaft sprocket and added one tooth to my rear sprocket. Put in a Dynojet kit, K&N filter, licensed it for the street and added a six pack rack.