SPROCKETS
#1
HELLO EVERYONE ,FIRST I WOULD LIKE TO SAY THAT THIS PLACE ROCKS AND YOUR INPUT MAKES IT THAT WAY (THANKS). I HAVE A 99 300EX AND WANT TO PUT SOME LIFE INTO IT I HAVE BEEN RIDING ABOUT A YEAR BUT AM JUST NOW GETTING INTO THE RACING ASPECT OF ATVING. MY EX IS STOCK EXCEPT FOR TAKING THE HANDLE BAR PLASTIC OFF AND RELOCATING THE LIGHTS AND KEY . I WANT TO START UPGRADING TO A RACE MACHINE AND WANT TO KNOW WHERE TO START . I WAS THINKING ABOUT CHANGING MY SPROCKET BUT WHAT TO IS THE QUESTION. ANY COMMENTS WOULD BE APPRECIATED OR ANY OTHER CHEAP MODS.
#2
For racing moto-x you will need the following: tether switch and nerfs, they are probably required by your district. Next buy youself a set of aftermarket handlebars. If you buy Renthal, buy the quad-bend not the 4-trax bend. They are much easier on your wrists. Get a set of 18" Turf-tamers or Holeshot mx's on 8" wheels for the rear. These are must haves. Buy these before you even buy an exhaust! It will cost you about $450 for the above 4 items. Getting number plates, numbers and signing up with the AMA and your district will run another $75. After that start adding things as you go[if you're on a budget] Gearing, exhaust, high comp- piston / cam, front tires, rev box , extended a-arms, swingarm and axle the list will never end. Good luck and have fun!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)