timming 200x
#2
timming 200x
Take out both plugs on the left crank cover and torn the crank so the "T" is at the mark in the upper (small) plug.
Put the cam with the mark aligned with the small triangle on the valve cover.
Turn your crank to the "f" and set the fire point....
should be good to go from there.
Put the cam with the mark aligned with the small triangle on the valve cover.
Turn your crank to the "f" and set the fire point....
should be good to go from there.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)