Foreman S valve adjustment
#11
#12
Foreman S valve adjustment
Originally posted by: drywaller
Ihave a 450 forman s. I got the compression stroke up and adjusted my valves. They were lose and needed a slight adjustment. This is the fisrt time I did this. Does it sound like I did it right. 006 I need some comfirmation. Me and my house serve the Lord as well.thanks
Ihave a 450 forman s. I got the compression stroke up and adjusted my valves. They were lose and needed a slight adjustment. This is the fisrt time I did this. Does it sound like I did it right. 006 I need some comfirmation. Me and my house serve the Lord as well.thanks
0.15 mm or 0.006 inch [img]i/expressions/face-icon-small-wink.gif[/img]
#13
Foreman S valve adjustment
Hey Quadwrench. Abouth the valve adjustment on my foreman. Just one more question. When I adjusted my valves, all I did was take my spark plug out and get my piston all the way up. This is when I made my valve adjustment. I was able to move my valve arms when I made this adjustment. What do I look for in my machines performance if my valves are not set right. Thanks drywaller
#14
Foreman S valve adjustment
Unscrew the timing hole cover. Position the piston at TDC on the compression stroke. Pull the recoil starter rope until the mark on the rotor is aligned with the timing notch inside the hole. If the mark is not visible in the timing hole. The piston is on the exhaust stroke. Rotate one turn. Then adjust the valves.
#15
Thread
Thread Starter
Forum
Replies
Last Post
Hankey Pankey
Performance Mods and Project Quads
3
05-01-2018 01:33 PM
Hankey Pankey
Performance Mods and Project Quads
0
08-17-2015 05:01 PM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
07-22-2015 05:00 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)