RANCHER WINCH MOUNTING PLATE.
#1
#4
This subject has been addressed plenty in Utility Quads and Other Quad Topics, but I offer this suggestion:
Make it yourself, I did, it was easy and inexpensive. Then order the Roller Fair Lead from Cablea's.
With Aluminum Plate, Clamps and Roller Fair Lead you should have no more than about $45.00 in it and it is a custom mount that will fit under the hood of the quad making it more protected and clean.
Go visit my yahoo link below and take a look.
Make it yourself, I did, it was easy and inexpensive. Then order the Roller Fair Lead from Cablea's.
With Aluminum Plate, Clamps and Roller Fair Lead you should have no more than about $45.00 in it and it is a custom mount that will fit under the hood of the quad making it more protected and clean.
Go visit my yahoo link below and take a look.
#5
#6
i just weld a plate up inside the front end with my mig. just did a winch for a friend. let me know if you want to do it to yours. i'm in newburgh and not to far from you. i'll weld up nice plate for your winch and weld a frame for the roller in front. no nuts and bolts to come loose. let me know. later - dana
#7
I made mine for about $10 (Cdn). That included the U - bolts to attach it to the frame.
The fairlead was extra, of course, and it required a seperate mounting bracket which I made for about $3.
If I can do it anyone can. Just take your time with the measurements. Remember, measure twice and cut (or drill) once.
The downside to making an under the plastic mount is, when you are done, the airflow to your oil cooler will be reduced. This does not seem to have been too much of a problem so far but it does merit consideration.
Temp
The fairlead was extra, of course, and it required a seperate mounting bracket which I made for about $3.
If I can do it anyone can. Just take your time with the measurements. Remember, measure twice and cut (or drill) once.
The downside to making an under the plastic mount is, when you are done, the airflow to your oil cooler will be reduced. This does not seem to have been too much of a problem so far but it does merit consideration.
Temp
Trending Topics
#8
I got mine from: http://www3.ns.sympatico.ca/atcharleys/, about $90 US delivered.
He does not list the Rancher but does have them. They come with the roller fairlead and fit very well.
He does not list the Rancher but does have them. They come with the roller fairlead and fit very well.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)