rejetting 450r....
#3
If your going to run with the airbox lid on ,,youd be about a 120 main
If your going to run with the airbox lid off or cut,,youd be about a 180 to 185 main
Needle will most likely stay the same(3rd position)
and the stock pilot should be good also,if you pop on decceleration bump to a 50 pilot
Jets only cost about $5 apiece from the dealer(dont buy a kit you'll end up with a bunch a crap you dont need)
and a main takes about 5 minutes to install
If your going to run with the airbox lid off or cut,,youd be about a 180 to 185 main
Needle will most likely stay the same(3rd position)
and the stock pilot should be good also,if you pop on decceleration bump to a 50 pilot
Jets only cost about $5 apiece from the dealer(dont buy a kit you'll end up with a bunch a crap you dont need)
and a main takes about 5 minutes to install
Thread
Thread Starter
Forum
Replies
Last Post
Bm400ex
General Chat
2
Jun 22, 2015 09:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




