Where to mount switch on WARN 424
#1
#2
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
No, the cable is big and stiff and it would cause nothing but problems up on your bars (cable is to short anyway). It goes just to the left of the bars, and is in a pretty convenient location. Very easy to shift on the fly.
Would be nice if someone made an electric aftermarket shifter for these, so you could just have a button up on the bars!!!
Would be nice if someone made an electric aftermarket shifter for these, so you could just have a button up on the bars!!!
#3
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
You might do a search here on this forum. Litegide, member’s name, mounted his release **** in the little compartment to the left of the handle bars. It's not something for quick access, unless you take the lid off in advance of riding, but it is esthetically pleasing to the eye that way. Just do a search for WARN 424 and you should find a post with a no so focused picture in it.
#4
#6
#7
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
I mounted mine on the right side of the handlebars so that it was out of the way of the 12 volt outlet.At least on this side you can be certain that you won't engage it while your wheels are spinning because of using your throttle hand to engage it.
Framer
Framer
Thread
Thread Starter
Forum
Replies
Last Post
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
07-18-2015 07:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)