400ex head gaskets
#1
400ex head gaskets
Alright i have just blown my 3rd head gasket on my 440 kit, after the second one i put the larger head studs in hoping it would solve this problem, i dont know what the deal is, any more sugestions on what i should do, the gasket kit is on its way again and anything before it gets here would be helpful. I was also thinkin my head might be warped but my bike has never really gotten that hott, at least not hot enought to warp anything.
Thanks Wreckless
Thanks Wreckless
#4
400ex head gaskets
Do you usually torque the head back down after your first ride? I ran a leaky head gasket on mine for about a year with very minimal power loss. I finally did the heavy duty studs and a good head gasket and re-torqued them and it didn't leak up to the time I sold it which was just a few months or so though. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
1ArmBandit
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
55
10-14-2015 09:03 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)