just bought a Honda Atc 110 three wheeler
its in decent shape
just needs a couple things

1st issue is the gear shifter pedal was stripped
so its already taken off, looking for replacement
found a couple on ebay and what not
but want to buy a new one
even if its just similar for a different model i dont care
any heads up on what works??
or where to find a cheap new one??

2nd major thing is the pull start cord is gone, handle is also gone.
I supposedly have all the peices of the starter though
and am curious where to find the cheapest cord and handle.
I am hoping to rewind it myself, if maybe someone can help me??

mainly need help with putting
it all back together like
especially the clips??
if anyone has pics??

I could buy the haynes honda atc book but then
I have to wait like a week it in the mail

any help seriously appreciated

jb20@alltel.net (Please for serious helpful replies)

thanks
Joe

Sometimes only the dealer will have the parts you need... or you can order them online here:

OEM Honda Parts

I really just need someone to show me a picture of how those clips go.

I picked up a universal pull start cord kit from Sears Craftsman Hardware

I am just unsure on how the clips sit, because I wasnt the one who took it apart

and also need to know the order of everything being put back into the starter housing

as for the shifter I found several on ebay, I am trying to decide which one to go with

looks like I can have a nearly new one for around 25 bucks delivered

or I could take a chance with a used one which would only cost me around 10-15 bucks.

any help appreciated.

if someone is nice enough to scan that page of the haynes guide or at least describe the process I would appreciate it ALOT

thanks
Joe

jb20@alltel.net for pictures or serious replies

http://babbitts.motorsportdealers.co...d/7/honda.aspx

shows the clips under recoil starter

just not sure how they clip together.

someone has to have done this before

any help GREATLY appreciated