in the back of my denniskirk catolog it has PJ1 FACTORY COLOR-MATCHING FRAME PAINTS my question is if i took everything off the quad and just have the bare frame would i beable to paint my whole frame would it look like $h|t, and would it look allright to go from grey to blue would it work? thank you

if you have dennis kirk it on page 245 in the chem/lubes section to see what im talking about

 

well, if you wanna do it right, when i airbrush things(done 2 frame and lots of quad related parts)i first either sandblast it or sand it down with a power drill attach it. if you put paint over a finish coat it can chip easier. i first put a primer on, then 3-4 coats leaving a day to dry in between. then put a clear coat on(finish coat) to give it the shinning look. spray paint will work, but i recommend to do take to factory paint off. if you need any tips e-mail me
nathaniel

 

Why don't you take your frame to an automobile paint shop and have it painted any color you want. There are about 8 million paint colors to choose from and auto paint is pretty durable.

 

I painted my Mojave frame with PJ Epxoy black. It sucks. I also painted my 250r frame but had my friend who paints cars paint it. He used a single stage urethane that holds up get!

 

He could go to a auto paint dealer and get one of those 8 million colors himself too. I paint all my own stuff and get my paint from carquest. They sell PPG brand and it looks and holds up pretty good.
Frame painting isn't that hard, just gotta make sure everything is clean, and sanded first. Do like the one guy says, primer first, then do 3 or 4 layers of color. I like to let mine set more than 24 hours, but thats just me I guess. Also the clearcoat is a personal preference, sometimes it can be a little tricky to use. Just take your time if you decide to do it, don't be in any hurry.