Valve Adjustment 2K Fourtrax 250 4 stroke 2x
#1
Valve Adjustment 2K Fourtrax 250 4 stroke 2x
G'day...
Quite new to this site... and find it very infomative. I have looked throughout the forums to find if this question has been asked in the past and have had no luck...
So here it goes:
I need to do a valve adjustment on my bike (ticking like crazy) and was wondering if anybody could provide me some specs for the adjustments?
Any info or tips would be so appreciated...
Thanks!
Quite new to this site... and find it very infomative. I have looked throughout the forums to find if this question has been asked in the past and have had no luck...
So here it goes:
I need to do a valve adjustment on my bike (ticking like crazy) and was wondering if anybody could provide me some specs for the adjustments?
Any info or tips would be so appreciated...
Thanks!
#2
#5
Valve Adjustment 2K Fourtrax 250 4 stroke 2x
Thanks for the reply guys, yes it's a 2000 TRX250 Recon...
So the Valve Specs are the same for the 2000 and 2001 Recon?
My appologies for the push, just a little frustrated with how the valves are sounding, had to miss a ride over the weekend...
Also, getting a grinding sound from the rear... it's not all the time but it's there... I'm guessing that I need to change the bearings in the rear now as well... is this a common maintanance practice?
I first thought it was the u-joint, but i think the sound is coming form the diff, I draind the diff oil and inspected the gear from the top, didn't see anything abnormal... is there a bearing where the driveshaft connects to the diff?
Would appreciate any recommendations (other than "get the book" lol)...
Thanks a bunch!!!
George
So the Valve Specs are the same for the 2000 and 2001 Recon?
My appologies for the push, just a little frustrated with how the valves are sounding, had to miss a ride over the weekend...
Also, getting a grinding sound from the rear... it's not all the time but it's there... I'm guessing that I need to change the bearings in the rear now as well... is this a common maintanance practice?
I first thought it was the u-joint, but i think the sound is coming form the diff, I draind the diff oil and inspected the gear from the top, didn't see anything abnormal... is there a bearing where the driveshaft connects to the diff?
Would appreciate any recommendations (other than "get the book" lol)...
Thanks a bunch!!!
George
#6
Valve Adjustment 2K Fourtrax 250 4 stroke 2x
Yep, the valve spec's are the same. I just did mine this weekend, they were clickling like a geiger counter, quiet as a mouse now. i don't know anything about your other problem, know you don't want to hear it but a clymer manual is a cheap investment.
Good luck!
Good luck!
#7
Thread
Thread Starter
Forum
Replies
Last Post
TLC
Honda
7
07-11-2015 02:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)