04 400 Rancher AT Shifting problem
#1
04 400 Rancher AT Shifting problem
After a good search I cant find any info on my problem. The quad will only shift into FWD and REV with the selector level. In FWD it will not shift out of 1st.
The ESP /AUTO switch on the right handle bar does nothing. When the switch is on ESP the shift motor is silent, I checked the fuses, there OK, Anybody experience this problem before?
Steve
The ESP /AUTO switch on the right handle bar does nothing. When the switch is on ESP the shift motor is silent, I checked the fuses, there OK, Anybody experience this problem before?
Steve
#2
04 400 Rancher AT Shifting problem
OK , so Im up and running and shifting again. Turns out to be a simple fix, evidently a branch/stick had found its way from the rear up to the shift motor on the left side under the silver plastic engine side cover and knocked one of the wires off the shift motor.
The clean, shiny, exposed contact was very visable after removing the side cover. The wire end was somewhat damaged so I had to squeeze it with a small pair of pliers to make it stay on tight.
Steve
The clean, shiny, exposed contact was very visable after removing the side cover. The wire end was somewhat damaged so I had to squeeze it with a small pair of pliers to make it stay on tight.
Steve
Thread
Thread Starter
Forum
Replies
Last Post
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
07-18-2015 07:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)