2004 Rancher ES Codes
#1
Been having a lot of problems out of the Rancher these days. It has 640 miles on it and a angle sensor that is about 50 miles old. It is not wanting to shift and seems like it isn't keeping a charge on the battery (new battery 4 months old).
Flashing error 7.
Anyone know what this means exactly?
0 blinks: No problem......(lol)
1 blink: ECU
2 blinks: ES Shift up / down shift system or shift release / related wire harness or ECU
3 blinks: Angle sensor
4 blinks: Gear position switch system
5 blinks: ECU motor driver
6 blinks: ECU fail-safe relay circuit
7 blinks: ECU Voltage convert circuit
8 blinks: Angle Sensor control motor
9 blinks: Angle Sensor short or related wire
10 blinks: Ignition pulse generator
11 blinks: Speed sensor
12 blinks: Gear position switch
Flashing error 7.
Anyone know what this means exactly?
0 blinks: No problem......(lol)
1 blink: ECU
2 blinks: ES Shift up / down shift system or shift release / related wire harness or ECU
3 blinks: Angle sensor
4 blinks: Gear position switch system
5 blinks: ECU motor driver
6 blinks: ECU fail-safe relay circuit
7 blinks: ECU Voltage convert circuit
8 blinks: Angle Sensor control motor
9 blinks: Angle Sensor short or related wire
10 blinks: Ignition pulse generator
11 blinks: Speed sensor
12 blinks: Gear position switch
#2
As you can see the first few tests are related to the alternator/charging .. You must have a good fully charged battery and good charging system ..
================================================== ================================================== ==========================
================================================== ================================================== ==========================
Thread
Thread Starter
Forum
Replies
Last Post
Sw00p
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
Sep 24, 2015 02:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




