just take some pics from start to finsh.........and good ones of the airbox because thats why most people dont know how.....once you come out of the airbox its just plumping....gluing plastic pipe together...but dont glue untill you know it fits

 

do you need any filters for the snorkel to restrict the airflow so it will run properly?

 

no .......do you have any other mods airfilter pipe has it ever been jetted

here i website with lots of info

www.highlifter.com

do a search you will most anything you need

 

I used 1.5" ABS pipe. I started with a 5" piece comming out of the airbox where the stock unit was installed. The 1.5" pipe needs to be taken down with a lathe or a coarse file and patience to fit in the stock rubber fitting. Then I used 2 22-1/2 degree fittings to clear the engine and direct the pipe to the front fender. Then I used a series of 45's & 90's to get the pipe forward and up through the fender and through the rack. I used threaded couplers to make swapable snorkle heights like the triangle kit.

Pics on www.sledsooley.com on the Area51 page.