What is the proper way to make the adjustment on this. It's on a 2007 Honda TRX400 Rancher. Sometimes it will go into reverse and other times I have to push the yoke at the shifting forks to make it go.

 

Here is the TRX400FA/FG gearshift adjustment.. If it shifts hard or doesn't always shift I would also check the gearshift spindle where it passes thru the aluminum they will seize/corrode there ...




================================================== ================================================== ===========

 

Thanks HondaMechanic. I wasn't sure if that was the adjustment or where the cable is secured to the frame. I will give that a try and post back with the results.

 

Took the cover off and sprayed down with WD 40. Closed it all back up and tested it out and all is well.

Thanks