REplacing rear axle on honda recon
#1
REplacing rear axle on honda recon
The axle on the passenger side of my honda recon ground down at the spines and the hub and axle both got destroyed. I need to install a new axle but I have never done this before. I am just wondering what I will need to replace the axle. I am trying to stay on a TIGHT budget as this quad is old and beat and probably isn't worth more than a few hundred bucks anyway...don't want to be spending big money on it when for all I know the motor could go or something else the next time I go riding.
So I have the moose racing wheel bearing set (came with three bearings and two seals) and I am going to order the axle, hub, castle and nut. What else am I going to have to replace when doing this job? Is there anything that I need to take apart that needs to be replaced after removing? Don't want to get it all apart, go to put it back together and realize I need to order more parts.
also any tips on doing the job would be much appreciated!
thanks!!!
So I have the moose racing wheel bearing set (came with three bearings and two seals) and I am going to order the axle, hub, castle and nut. What else am I going to have to replace when doing this job? Is there anything that I need to take apart that needs to be replaced after removing? Don't want to get it all apart, go to put it back together and realize I need to order more parts.
also any tips on doing the job would be much appreciated!
thanks!!!
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
06-24-2015 01:40 AM
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
06-10-2015 12:45 AM
hoopduerr
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
06-01-2015 08:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)