honda foreman rebuild
Oct 1, 2009 | 11:31 PM
#3
Extreme Pro Rider
GOT BOOST!
GOT BOOST!
Joined: Jan 2004
Posts: 3,204
Likes: 0
It depends on the engine.
On some when the piston is fly cut the intake fly cut will be bigger the the exhaust and if you get it backwards the valve can wack the piston.
On a wedge chamber the quench side has to index into the head.
On some pistons the pin is offset on the piston.
These are some of the reasons I can think of.
On some when the piston is fly cut the intake fly cut will be bigger the the exhaust and if you get it backwards the valve can wack the piston.
On a wedge chamber the quench side has to index into the head.
On some pistons the pin is offset on the piston.
These are some of the reasons I can think of.
Oct 1, 2009 | 11:39 PM
#4
Pro Rider
Joined: Jul 2009
Posts: 344
Likes: 0
It depends on the engine.
On some when the piston is fly cut the intake fly cut will be bigger the the exhaust and if you get it backwards the valve can wack the piston.
On a wedge chamber the quench side has to index into the head.
On some pistons the pin is offset on the piston.
On some when the piston is fly cut the intake fly cut will be bigger the the exhaust and if you get it backwards the valve can wack the piston.
On a wedge chamber the quench side has to index into the head.
On some pistons the pin is offset on the piston.
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
Jul 22, 2015 05:00 AM
TLC
Honda
7
Jul 11, 2015 02:28 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)