300ex clutch issue
#1
300ex clutch issue
My buddy has an '07 300ex that the clutch wasn't engaging until you let the lever almost all the way out. (was like this when purchased used) We put new clutch plates and springs in and it barely helped.
It now has about twice as much clutch to work with than before but it is by no means normal.
I have an '08 z400 and the clutch begins to engage while the lever is just starting to be let out. All other sport quads I rode have been that way...
I can not figure out what the problem may be, any suggestions?
It now has about twice as much clutch to work with than before but it is by no means normal.
I have an '08 z400 and the clutch begins to engage while the lever is just starting to be let out. All other sport quads I rode have been that way...
I can not figure out what the problem may be, any suggestions?
#3
could you possibly show me on a pic or diagram? We replaced the 4 springs that are shown in the clutch assembly diagram as #8. (It only shows one, but there are 4, one for each bolt)
http://www.bikebandit.com/houseofmot...15681sch419094
http://www.bikebandit.com/houseofmot...15681sch419094
#6
Never a dumb question...I was honestly hoping for it to be something dumb that I overlooked! (but yeah, we tried that)
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)