HARDEND ROCKERS $100
Apr 7, 2001 | 01:10 AM
#1
Thread Starter
|
Trailblazer
Joined: Mar 2001
Posts: 85
Likes: 0
I have person that hardends steel and for a hundred bucks for he'll harden rockers so if anyone is interested in getting there rockers done E-mail me at IILiQuidiceII@aol.com
and will set something up..
and will set something up..
Apr 12, 2001 | 02:33 AM
#5
Trailblazer
Joined: Apr 2001
Posts: 99
Likes: 0
MAX
you need it if you plan to build your motor up!Their are two real weakness with the 400ex motor.the rod------and the rocker arms.The rod is too weak it has and does snap and come out the cases. The rocker arms are to soft they wear out, while also wearing out your cam and then they shatter which means you have to split the cases to clean it all out plus replace any seal,bearing,ect.also the vavle cover assem. because its wasted.
you need it if you plan to build your motor up!Their are two real weakness with the 400ex motor.the rod------and the rocker arms.The rod is too weak it has and does snap and come out the cases. The rocker arms are to soft they wear out, while also wearing out your cam and then they shatter which means you have to split the cases to clean it all out plus replace any seal,bearing,ect.also the vavle cover assem. because its wasted.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)