330 ticking?
#12
#13
If the cam chain is off timing the valves will click. When I put my 230 back together it clicked and the valves were perfect yet they clicked and the cam chain grinded. Turned out I had the cam chain to tight and it had an advanced timing. If I remember right my 300 has an automatic cam chain adjuster.
#15
AL300EX,
I had to grind my case-saver down a bit to get it to fit in with the 14 tooth front sprocket. It was about a 30 minute job. Pretty easy.
I don't know what kind of carb your running with your 330, but a "stock" 400EX carb works great. You can find them used everywhere, or Service Honda has them new for about $160(I think).
I bought a new 400EX carb and had if taper-bored to 27mm and bolted that on. Installed a 350X airboot tube between the carb and airbox, have 8-1 inch holes in my airbox lid, and am sucking air through a UNI. It works well.
I'm thinking about adding an oil cooler. Everyplace I've seen them charges atleast $279. Pretty spendy....
I had to grind my case-saver down a bit to get it to fit in with the 14 tooth front sprocket. It was about a 30 minute job. Pretty easy.
I don't know what kind of carb your running with your 330, but a "stock" 400EX carb works great. You can find them used everywhere, or Service Honda has them new for about $160(I think).
I bought a new 400EX carb and had if taper-bored to 27mm and bolted that on. Installed a 350X airboot tube between the carb and airbox, have 8-1 inch holes in my airbox lid, and am sucking air through a UNI. It works well.
I'm thinking about adding an oil cooler. Everyplace I've seen them charges atleast $279. Pretty spendy....
#16
Im still running the stock 300 carb, with no airbox lid,and a K&N filter with outerwear. I have been thinking of getting a 400ex carb, does it mount right up to the 300, and does it come prejetted or did you change the jets. I was also considering a Lectron. Dennis Kirk sells the JAGG oil cooler for 213.00 I was thinking of getting that also, but my engine seems to do alright for now. Alex
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)