2013 Kymco 500I 4wd
my front wheels keep locking up in 2wd back wheel just spin
I have to use 4wd to get bike to move not the brakes I blead and changed them already

 

Need more info...is it the brakes locking up or the diff locking up?? In either case, if it is the brakes then calipers need rebuild or replaced, if front diff is locking sounds like moisture/rust might be in there. A complete drain and flush of the front diff would be a place to start

 

I have check the brakes and even bled them off to the point they are not working and still it is locking up on the frontend it will drive in 4wd but it is very bogged down

 

Still need to know if it is the brake pads locking up!! If it is then the calipers are probably bad and need replaced. You need to define the problem before it can be solved!

 

I look and the brakes are not locking up, the front wheels just stop turning
I jacked it up and even in neutral cant spin them

 

Brakes have nothing to do with neutral. Either the front diff is locking up or the brake pads/ calipers are locked up...need to determine which one or both!!